Pendant Hanging Instructions

how to install hardware

how to install electrical components

Read below for instructions on how to install your new hanging light

These instructions are provided for your safety. It is very important that they are read carefully and completely before installation of this pendant. We strongly suggest that all direct wired fixtures be installed by a professional electrician. 

1. Turn off power circuit.

2. Tie overhand knot inside the canopy.

3. Locate the positive (black), negative (white), and ground (green or bare copper in the junction pox) wires in the junction box and at the end of the cloth covered wire.

4. Stip the end of the wires to expose the stranded copper wire.

5. Connect matching wires with the wire connectors and wrap secure with electrical tape.

6. Secure mounting plate to ceiling.

7. Secure canopy to mounting plate.

proposition 65 warning

This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Care instructions: follow the instructions below to keep your piece squeaky clean

dust with a soft, dry cloth

To protect the finish, do not use cleaners or abrasives.

we use type "b" regular bulbs

Chandeliers have 4, 6, or 8 Candelabra sockets for Type "B" regular bulbs or G16 frosted globe bulbs. Recommended maximum wattage is 40 watts per bulb.